Parking Lock From ZKT eco, Plock 2

Parking Lock From ZKT eco, Plock 2

• Plock 2 keeps all original features of Plock 1 and is equipped with new auto-sensing function.
• User can easily manage his/her parking space by placing a sensor in a cigarette lighter receptacle.
• Compared with traditional parking locks, Plock 2 does not need any manual operation, which makes parking experiences more ideal.
• It is a competent private parking manager.

Function & features for Parking Lock

• Auto-sensing: It will automatically open when you approach from under 15m.
  When you leave the detection area, the arm of the lock will automatically rise.
• Built-in 180° anti-collision alarm system: an alarm will be triggered if the arm of the lock is being pushed and pulled by external forces.
• 2T high pressure resistance: withstand 2 tons of car rolling without damage.
• Protection class: IP67.
• Low battery automatically prompts: if the built-in battery is low, buzzer will be triggered and Led light will flash.
• Anti-theft: the key components of the lock inside the housing, which need a key to open.

Installation tool:

Impact drill, drill bit No. 8, No. 8 expansion screw, hex wrench, ordinary hammer.

 Installation steps:

1.  Pull up the arm of the parking lock, unlock and remove the top cover.
2.  Determine the parking lock installation position, and place the parking lock in the position
3. Use a pen to mark three holes to facilitate drilling.
4. Drill three holes with diameter of 12mm and depth of 50mm with the model M12 drill bit according to the positions of the three mounting holes, and knock the expansion bolt M8 into the hole, then remove the nut.
5. Thread the three holes through the expansion bolt and tighten the nut.
6. Connect the battery plugs and lock the top cover.
7. Start operating the parking lock. If it‘s operates normally, the installation is completed.

FAQ for Plock                      Plock 2 leaflet-20181123                Plock2 User manualV1.0_20180516